HP iPAQ 2000 series WM5 Devices
1. Press and hold the Calendar, Power, and Messaging buttons.
2. While holding down these buttons, use the stylus to lightly press the Reset button on the bottom of the HP iPAQ until the device restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button. The HP iPAQ restarts and powers on.
(Click the picture to view in actual size)
Dell Axim x51v
1. With the device turned on, press and hold the Power button at the top of the unit.
2. While holding the down Power button, use the stylus tip to press the Reset button at the backup of the device. Allow the screen to fade to off.
3. Release both buttons. The unit will power back on and display a menu to confirm the hard reset request. Then tap Contacts to start the hard reset. The Axim will be hard reset, just as it was when it left the factory.
(Click the picture to view in actual size)
Palm Treo 700w/wx, 750
1. Hold down the Power button on your Palm.
2. Keeping the Power button still held down; lightly push the end of a paper clip on the Reset pin.
3. A confirmation message will appear. To go ahead with the hard reset, press the scroll up key.
(Click the picture to view in actual size)
HTC Wizard / i-mate K-JAM / Cingular 8125 / T-Mobile MDA
1. Press and Hold the Comm Manager button B (top left hand edge of the device) and Voice Command button C (top right hand edge of the device) simultaneously.
2. While holding those two buttons, use the stylus to press the Reset button on the right hand side of the device (near the IR port).
(Click the picture to view in actual size)
i-mate JASJAR
1. Press and Hold the two soft buttons which are normally mapped as Calendar and Contacts on the keyboard
2. While holding these two buttons, use the stylus to press the soft-reset button located on the back of the device next to the mini-USB port.
3. A confirmation message will appear. Press “0” to go ahead with the hard reset.
(Click the picture to view in actual size)
HTC Apache / Sprint PPC-6700 /Verizon XV6700:
1. Press and Hold the two buttons with “-“ on them.
2. Press the Reset button once and make sure you are still holding onto those buttons.
3. A confirmation screen should appear asking you if you want to reset all data. Press Y to reset, N to cancel.
(Click the picture to view in actual size)
Mitac Mio A201:
1. Make sure the device is turned off then Press and Hold the Down volume button and the End button at the same time.
2. Release both buttons when the device Vibrates. The unit will turn on automatically and the Setup Wizard will display.
3. Then follow the instructions to complete the hard reset.
(Click the picture to view in actual size)
|  |
